Cast contact heating plates are often installed in the pre-heating station. This technology has been in use now for more than 20 years.
- Your experience has shown that this area has the largest influence on the quality of the
cup forming.
- Our experience has shown that, depending on the system in place, the temperature can
vary by more than 8°C during operation.
Our goal here is to limit the temperature variation during machine operation to a maximum of
2°C. In addition to the design of the drive system, this is the basis for a trouble-free cup forming.
Our sandwich heating plates are composed of the following parts:
- contour plate
- concealed coil silicone heating elements
- cover plate
Each part can be replaced separately.
